Jasa repair handphone dead boot / unbrick

31.09.2013  RIFF JTAG – Huawei modem U173-u2 Unbrick – dead boot repair supported

Resurrecting Huawei E173U2 is simple. Just make sure you solder all JTAG signals and insert modem into a USB port for it to get powered.
If modem is not detected by RIFFBOX JTAG, disconnect JTAG connector, re-insert modem into USB and then connect back the JTAG connector.

To resurrect Huawei E173U2:

  •  Solder JTAG cable to Huawei E173U2 JTAG pads;
  •  Insert Huawei E173U2 modem into any USB port for power;
  •  Make sure Huawei E173U2 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

ec63modem hsdpa huawei e173 2 0 b RIFF JTAG – Huawei modem U173 u2 Unbrick – dead boot repair supported

cara memperbaiki modem yang mati total - cara memperbaiki modem bolt mati total - cara memperbaiki modem huawei e173 mati total - memperbaiki huawei 173 mati total - memperbaiki modem huawei - memperbaiki modem huawei yang mati total -

Leave a Reply

You must be logged in to post a comment.

You might also likeclose