Jasa repair handphone dead boot / unbrick
 

05.10.2013  RIFF JTAG – Easy repair Huawei Ascend W1-U00 supported

Repairing bricked Huawei W1-U00 is easy with the RIFF Box.

To resurrect Huawei W1-U00:

  •  Solder JTAG cable to Huawei W1-U00 JTAG pads;
  •  Connect Huawei W1-U00 tablet’s charger for power;
  •  Make sure Huawei W1-U00 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Copy ‘dload’ folder from firmware update package to SD card root;
  •  Insert SD card into the SD slot;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Volume up’ keys and press Power-On.

.
bec5huawei ascend w1 RIFF JTAG – Easy repair Huawei Ascend W1 U00 supported


huawei w1-c00 bootloop - cara flash hp huawei ascend w1 - W1-U00(C00)Repair bootloader rar -
None found.
 

Leave a Reply

You must be logged in to post a comment.

You might also likeclose