Jasa repair handphone dead boot / unbrick

RIFF JTAG – Easy repair Samsung GT-S6310 Galaxy Young supported

Repairing bricked Samsung S6310 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6310:

  •  Solder JTAG cable to Samsung S6310 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S6310 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
27d5samsung gt s6310 galaxy young1 RIFF JTAG – Easy repair Samsung GT S6310 Galaxy Young supported

cara pake jtag galaxy y - cara mengatasi hp samsubg galaxy young2 hang - samsung gt-s6310 mati total - mengatasi galaxy y s6310 yang mati total - cara mengatasi hp samsung S6310 mati total - cara mengatasi samsung galaxy young gt s6310 tidak booting - sam s6310 matot - salah flash galaxy young5360 mati total - mengatasi bootloop galaxy y gt s6310 - Cara ngeflash samsung galaxy young s6310 yang mati total -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose