Jasa repair handphone dead boot / unbrick

10.10.2012  RIFF JTAG – CoolPad 5860 + Unbrick – Dead Boot Repair Supported

Repairing bricked CoolPad 5860+ is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect CoolPad 5860+:

  •  Solder JTAG cable to CoolPad 5860+ JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure CoolPad 5860+ is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
a66bcoolpad5860 RIFF JTAG – CoolPad 5860 + Unbrick – Dead Boot Repair Supported

gt 5860 usb pin out - cara me restar hp coolpad - samsung gt 5860 - restar hp coolpad - coolpad hp kaskus - cara software hp coolpad - cara restat hp collpad - cara merestar hp coolpad - cara mereset master hp coolpad - cara mereset hp coolpad -

Leave a Reply

You must be logged in to post a comment.

You might also likeclose