Jasa repair handphone dead boot / unbrick
 

07.02.2013  RIFF JTAG – Samsung GT-S6810P Galaxy Fame WORLD FIRST Boot repair support ! ! !

Repairing bricked Samsung S6810P is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6810P:

  •  Solder JTAG cable to Samsung S6810P JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S6810P is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘OK’ keys and press Power-On. And after you see the warning message press ‘Volume Up’ key to enter Download Mode.

.
0e2bsamsung gt s6810 galaxy fame RIFF JTAG – Samsung GT S6810P Galaxy Fame WORLD FIRST Boot repair support ! ! !


solusi samsung gt-s6810 matot - samsung s6810 matot - samsung gt s6810 matot - samsung GT-s6810 matot - solusi samsung s6810 matot - solusi samsung gt s6810 matot - samsung gt s6810 matot solusi - solusi galaxy fame matot - Solusi sm gt6810 matot - Solusi samsung galaxy fame 6810 matot -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose