21.02.2013 RIFF JTAG – Samsung GT-P3100 Galaxy Tab 2 7.0 Unbrick – Dead boot repair supported
Samsung P3100 is based on the OMAP4430 Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Please note: The initial loader in the Samsung P3100 is XLOADER. Due to OMAP4430’s some peculiar TrustZone security features current resurrector will boot only in case XLOADER is alive. That’s why model name of current resurrector has additional text: ‘XLoader+’. In case XLOADER is damaged (which happens for example after wrong firmware reflash), you will have to use different resurrector DLL – the one with the ‘XLoader-” delimiter.
To resurrect Samsung P3100:
- Solder JTAG cable to Samsung P3100 JTAG pads;
- Connect USB cable to phone and PC;
- Insert battery;
- Make sure Samsung P3100 is selected in the list of models;
- Make sure a fixed TCK frequency is selected;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press Power-On.
biaya service tab p3100 diservice center dsmsung - berapa ongkos servis galaxy tab 2 hard bootloop - p3100 boot - mengatasi soft bootloop di samsung tab 2 - mengatasi samsung galaxy tab 10 1 unbrick - mengatasi bootloop samsung GT-P3100 - galaxy tab 2 bootloop - cara mengatasi samsung GT P3100 yang boot loop - cara mengatasi galaxy tab 2 yang boot loop - samsung GT p3100 does not power on -