Jasa repair handphone dead boot / unbrick

21.02.2013  RIFF JTAG – Samsung GT-S6500D Galaxy Mini 2 (Samsung Jena) Unbrick – Dead boot repair supported

Repairing bricked Samsung S6500D is easy with the RIFF Box. Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6500D:

  •  Solder JTAG cable to Samsung S6500D JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S6500D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

d7b9samsung gt s6500 galaxy mini2 RIFF JTAG – Samsung GT S6500D Galaxy Mini 2 (Samsung Jena) Unbrick – Dead boot repair supported

cara unbrick galaxy mini 2 - s6500 brick - cara memperbaiki samsung gts 6500 yang bootloop - samsung GT-S6500D MATOT - cara mengatasi bootloop samsung galaxy mini2 s6500d - servis hp samsung galaxsy mini2 gagal start - cara software hp samsung galaxy GT-6500d mati total - samsung s5600d matot - cara flashing Samsung S6500 yang bootloop - solusi samsunggt s6500d matot -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose