Jasa repair handphone dead boot / unbrick
 

05.01.2012 Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported

Samsung S5670 resurrection is simple. Make sure to hold Power On button during JTAG connection establishing phase.

To resurrect Samsung S5670 do this:

  •  Solder JTAG cable to Samsung S5670 JTAG pads;
  •  Insert battery and connect USB cable to phone and PC;
  •  Make sure Samsung S5670 is selected in the list of models;
  •  Click Resurrect button;
  •  Press Power On key on the phone;
  •  Wait few seconds until software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘OK’ keys and press Power-On to enter Download Mode;

_
8ba0samsung galaxy fit front landscape RIFF JTAG – Samsung Galaxy Fit (GT S5670) Unbrick – Boot Repair supported


cara unbrick galaxy fit - yhs-0001 - galaxy fit mati total - cara mengatasi bootloop galaxy fit - samsung galaxy fit mati total - solusi samsung galaxy fit mati total - unbrick galaxy fit kaskus - harga hp samsung galaxy mini GT-S5670 - how to repair bootloader hard bricked in galaxy fit s5670 - mengatasi galaxy fit yang hardbrick -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose