Jasa repair handphone dead boot / unbrick
 

09.02.2012     Samsung Galaxy Precedent SCH-M828 Unbrick supported

Samsung M828 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung M828 do this:

  •  Solder JTAG cable to Samsung M828 JTAG pads;
  •  Insert battery and connect USB cable to phone and PC;
  •  Make sure Samsung M828 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait few seconds until software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On to enter Download Mode;

_
6d67Samsung Galaxy Precedent M828C c RIFF JTAG – Samsung Galaxy Precedent SCH M828 Unbrick supported


hp samsung galaxy y - look up 268435460701617576 samsung m828c galaxy - samsung galaxy precedent/bricked - bricked samsung precedent - how to unbrick a samsung galaxy precedent - samsung galaxy precedent update zip - samsung sch-m828c bricked - samsung sgh828c - Straight Talk Samsung M828C factory brick how -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.