Jasa repair handphone dead boot / unbrick
 

01.03.2012   Samsung GT-S5360 Galaxy Y Unbrick – Boot repair supported

Resurrecting Samsung S5360 is easy. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.

To resurrect Samsung S5360:

  •  Solder JTAG cable to Samsung S5360 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung S5360 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
  •  If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.
dcf7Samsung galaxy young s5360 RIFF JTAG – Samsung GT S5360 Galaxy Y Unbrick – Boot repair supported


samsung 5360 - samsung galaxy 5360 - samsung yang - samsung galaxy yang - galaxy 5360 - galaxy yang - 5360 samsung - samsung galaxy y 5360 - galaxy y - samsung gts 5360 -
Tagged with:  

1 Response » to “RIFF JTAG – Samsung GT-S5360 Galaxy Y Unbrick – Boot repair supported”

  1. [...] Riff jtag – samsung gt-s5360 galaxy y unbrick – boot Riff jtag – samsung galaxy ace – gt-s5830i unbrick – boot repair supported. 03.04.2012 riff jtag – samsung gt-s5830i unbrick – boot repair supported. [...]

Leave a Reply

You must be logged in to post a comment.

You might also likeclose