Jasa repair handphone dead boot / unbrick
 

16.03.2012  RIFF JTAG – Samsung GT-i9210 Galaxy S II LTE  Unbrick – Dead Boot Repair Supported, World First ! ! !

Repairing bricked Samsung I9210 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung I9210:

  •  Solder JTAG cable to Samsung I9210 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I9210 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
27c4Samsung GT i9210 Galaxy S II LTE RIFF JTAG – Samsung GT i9210 Galaxy S II LTE  Unbrick – Dead Boot Repair Supported, World First ! ! !


Gambar HP samsung - gambar hp - mOdel hp samsung - gambar dan harga hp samsung - gambar hp samsung dan harganya - hp samsung s2 - i9210 hard reset - gambar hp samsung galaxy s2 - harga samsung s2 mini - model hp samsung dan harga -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose