Jasa repair handphone dead boot / unbrick
 

31.05.2012  RIFF JTAG – Samsung SHV-E160K Galaxy Note LTE Unbrick – Dead Boot Repair supported

Repairing bricked Samsung E160K is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8260 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung E160K:

  •  Solder JTAG cable to Samsung E160K JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung E160K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
bf50samsung shv e160k galaxy note RIFF JTAG – Samsung SHV E160K Galaxy Note LTE Unbrick – Dead Boot Repair supported


e160k hard reset - samsung e160k hard reset - samsung e160 - shv-160l - shv-e160k hard reset - shv e160s hard reset - samsung e160k di flash gagal keluar conect to pc - samsung galaxy note SHV -E160L - Samsung USB driver shv-e160k - shv e160k matot -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose