Jasa repair handphone dead boot / unbrick

Repairing bricked Samsung I717 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung I717:

  •  Solder JTAG cable to Samsung I717 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I717 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

4283samsung galaxy note 3 RIFF JTAG – Samsung SGH i717 Galaxy Note LTE Unbrick Dead Boot Repair supported

galaxi noten n7000 matot unbrick surabaya - SAMSUNG SHVE120S MATOT SULUTION - bricked i717 - sghi317 bricked - samsung sgh 1717 matot - jtag galaxy note - how to make a samsung note 3 jtag - harga service samsung galaxy n7000 matot surabaya - e120s qualcomm hs-usb qdloader 9008 - dead galaxy i717 -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.