Jasa repair handphone dead boot / unbrick
 

14.09.2012   RIFF JTAG – Samsung GT-S6102 Galaxy Y Duos Unbrick – Dead Boot repair

Resurrecting Samsung S6102 is easy with RIFF Box . To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.

To resurrect Samsung S6102:

  •  Solder JTAG cable to Samsung S6102 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung S6102 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
  •  If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.
1ae1samsung galaxy y duos 2 RIFF JTAG – Samsung GT S6102 Galaxy Y Duos Unbrick – Dead Boot repair


cara mengatasi bootlop samsung galaxy young GT-S6102 tampa komputer - cara repair samsung young dead boot - cara memperbaiki bootloop samsung gt s6102 - solusi samsung gt-s6102 matot - MengatAsi galaxy y hardbrick - samsung galaxy y duos unbrick cara - samsung GT-S6102 matot - samsung note 1 matot dan tidak terdeteksi pc - samsung young gt s5360 mati total tidak terbaca pc - cara flash samsung gt s-6102 deadboot tanpa pc -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose