Jasa repair handphone dead boot / unbrick
 

16.10.2012   RIFF JTAG – Samsung Wave Y GT-S5380D Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung S5380D is easy with the RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.

To resurrect Samsung S5380D:

  •  Solder JTAG cable to Samsung S5380D JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung S5380D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
  •  If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.
f39aSamsung Wave Y La Fleur RIFF JTAG – Samsung Wave Y GT S5380D Unbrick – Dead Boot Repair Supported


yhs-fh_lsonsw - samsung galaxy wave y la fleur - harga second samsung gt s5380d - 5380 boot - harga hp samsung gt-s5380d - harga hp samsung s5380d - cara hard reset gt5380d - прошить samsung 5380d в deat mode - harga samsung gt 5380d - CARA FLASHING SAMSUNG GT-S5380D -
Tagged with:  

1 Response » to “RIFF JTAG – Samsung Wave Y GT-S5380D Unbrick – Dead Boot Repair Supported”

  1. […] Riff jtag – samsung wave y gt – s5380d unbrick – dead […]

Leave a Reply

You must be logged in to post a comment.

You might also likeclose