Jasa repair handphone dead boot / unbrick
 

19.10.2012  RIFF JTAG – Samsung GT-S5300 Galaxy Pocket Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung S5300 is easy with the RIFF Box. Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S5300:

  •  Solder JTAG cable to Samsung S5300 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S5300 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
efdcsamsung gt s5300 galaxy pocket RIFF JTAG – Samsung GT S5300 Galaxy Pocket Unbrick – Dead Boot Repair Supported


galaxy pocket mati total - mengatasi hp samsung gt s5300 matot - cara atasi gt-s7500 yang mati total - Cara flash galaksi poket yang mati total - cara service hp samsung gt s6500 mati total - mengatasi gt s5300 matot - memperbaiki samsung pocket gagal booting - hp samsung galaxy pocket blang mati total - harga service samsung galaxy pocketdead boot - harga service hp mati total samsung pocket -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose