Jasa repair handphone dead boot / unbrick

18.10.2012  RIFF JTAG – Samsung GT-i9070 Galaxy S Advance Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung I9070 is easy with the RIFF Box.
Please note, if you have problems connecting phone, then make sure USB Cable is disconnected, insert battery and press Power On and try connecting again.

To resurrect Samsung I9070:

  •  Solder JTAG cable to Samsung I9070 JTAG pads;
  •  Attach battery;
  •  Disconnect USB Cable (if was connected);
  •  Make sure Samsung I9070 is selected in the list of models;
  •  Click Resurrect button;
  •  If required, press Power On key;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

1847samsung gt i9070 galaxy s advance RIFF JTAG – Samsung GT i9070 Galaxy S Advance Unbrick – Dead Boot Repair Supported

cara flash ulang samsung gt-i9070 - cara mengatasi samsung galaxy s advance gagal booting - samsung s advan flash gk mau boting - cara mengatasi bootloop samsung galaxy s advance - samsung i9070 malaysia tidak bisa booting - cara perbaiki imei samsung i9070 - cara mrngatasi bootlop untuk samsung galaxy s advance - galaxy s advance mati total - hard brick pada samsung s advance - mengatasi hp samsung sgsa yang bootloop -
Tagged with:  

Leave a Reply

You must be logged in to post a comment.

You might also likeclose